Fluoro additive AW-322 is a white PTFE powder specialized for use as an additive to impart low surface energy and other fluoropolymer attributes. AW-322 is well suited for added in inks and coatings where a narrow particle size distribution is desired. It could improve lubricity and wear resistance when with plastics and rubbers. Added to lubricants, it can enhance performance under
severe conditions. AW-322 can be used at temperature from -190℃ to 250℃(-310℉ to 480℉).
AW-322 is generally designed to used as an additive, although it can also be used alone as a dry lubricants. It is unsuitable to be used as a molding or extrusion resin to replace for any of the high molecular weight PTFE resin. AW-322 is inert to all chemicals and solvent. It is a
AW-322 is packaged in 25-kg/ carton. 9,18,27 cartons are packaged on one pallet f or easy shipping, handling and storage.
Before using AW-322 please read the Material Safety Data Sheet carefully. Open and use containers only in well-ventilated areas using local exhaust ventilation. Vapor and fumes liberated during hot processing, or from smoking tobacco or cigarettes contaminated with AW-322, may cause flu-like symptoms(chill, fever, sore throat).Vapor and fumes liberated during hot processing should be exhausted completely from work area. Contamination of tobacco with AW-322 should be avoided.
Mixtures with some ﬁnely divided metals, such as magnesium or aluminum, can be flammable or explosive under some conditions.
AW-322 is used as an additive in printing inks to improve certain properties, such as rub resistance, slip, surface smoothness and gloss. It can also reduce the “blocking”. Typically, AW-322 is used in combination with polyethylene waxes to get the property modification. Due to its small particle size and narrow particle size distribution, AW-322 can be use in a variety of coating system to improve nonstick, anti friction, corrosion inhibition properties. It can also reduce the friction coefficient and increase the rub resistance. Plastics and elastomers containing AW-322 have shown improved lubricity and reduced friction and wear. Typical loadings of 5-20% by weight were used.
*All information is based on data obtained from the manufacturer or recognized technical sources. The information is believed to be accurate. We make no representation or warranty, express, or implied, concerning the accuracy or sufficiency of the information. We are not liable for any damages resulting from the use of the information.